1. No Need to Pre-Press or Pre-Iron
Moisture or wrinkle removal is not necessary. Only pre-press if you prefer.
Press Instructions for DTF Transfers
Step-By-Step Pressing Instructions
Follow these steps to ensure perfect application every time.
2. Position Your Design
Place your transfer in the desired location and ensure it is flat before pressing.
3. Heat Press & Peel After a Few Seconds
- 300–320°F
- 8–10 seconds
- Medium to firm pressure
- Hot or cold peel
- Second press: 2–3 seconds with parchment/Teflon (optional)
4. Thick Garments (hoodies, fleece)
- If needed, lower heat to 290–300°F
- Avoid overheating
5. Care Instructions
- Wait 24 hours before the first wash
- Wash inside out in cold water, gentle cycle
- Air dry or tumble dry on low heat
- Do not use bleach or fabric softeners
- Do not iron directly on the transfer
- For ironing: turn garment inside out or cover with parchment
6. Home Iron Option
- Highest heat setting (no steam)
- Press firmly for 15–20 seconds
- Cold peel
- Quick 5-second second press (optional-recommended )
Note:
- Teflon is not required on first press
- Works on any garment